CAD-CUT® Hologram SA250

CAD-CUT® Hologram from Stahls. Adhesive carrier.

• Flex foil with glossy surface finish
• Adhesive carrier
• Easy cutting and weeding
• Temperature: 150°C, Time: 10 sec., Pressure: medium, (#4–6 on Hotronix®), Peel: cold
• Recommended fabrics: 100% cotton, 100% polyester (Test before application), polyester-cotton blends
• Multi-Colour-Designs: is not recommended for multi-layer applications
• You should always test cut prior to any production run, cutter settings will need to be adjusted as the blade ages
• For optimal cutting and weeding, maintain a line thickness of at least 1.5 mm for lettering and logos
• Washable at 40°C
• Do not use fabric softeners or bleach
• Suitable for drying with gentle adjustment
• Wash and iron inside out
• Store in cool, dry area; avoid direct heat and sunlight
• Every 60 cm there is an approx. 0.5 mm wide horizontal strip in the surface of the film for production reasons